All started when I wanted to have a true HA configuration for the server nodes. That implies that not only the storage of each server is a RAID10 setup, but also the boot and root resources are in a RAID1 configuration. I started to use an old and known tutorial to convert from standard installation… Read More »
As more and more “smart home” devices got installed around the house the need to have 24/7 Internet connection was more and more a necessity. The solution I choose was to have a back-up mobile Internet for the home. To make this completly transparent to the “Internet of things” from the house this backup had… Read More »
A good way to backup the OS of the servers is to use rear Relax and Recover. Following are the steps to ensure that we have a proper rescue data set for both servers. STEP 1: Install rear from the Fedora repo on both nas1 and nas2 [root@nas1 ~]# dnf install rear [root@nas2 ~]# dnf… Read More »
The following are the steps to set up LTFS with a HP Ultrium 3000 and Fedora. STEP 1: Download from HP site and install HP Library & Tape Tools (hp_ltt418_linux_x86_64.tar). STEP 2: Download the HP Store Open Standalone binaries for RHEL x64 from the HP website. (HP_StoreOpen_Standalone_2.3.0_for_RHELx64_Z7550-01726.tar.gz) STEP 3: Install the rpm on Fedora Linux.… Read More »
As the home environment becomes more complicated the need for an integrated whole solution for the entire environment was necessary. I already have an automatic backup setup using Barracuda Yosemite Server Backup, but this is only for one server (nas1) where OwnCloud is residing. The daily backup job in fact does a backup only for… Read More »
Basic Usage Convert PostScript to PDF: gs -sDEVICE=pdfwrite -dCompatibilityLevel=1.4 -dPDFSETTINGS=/ebook -dNOPAUSE -dQUIET -dBATCH -sOutputFile=fileout.pdf filein.ps Merge/combine PDF and/or PostScript files: gs -q -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -sOutputFile=fileout.pdf \ filein.ps filein2.pdf Extract a page from a PostScript or a PDF document: gs -q -dBATCH -dNOPAUSE -sDEVICE=pdfwrite -dFirstPage=3 -dLastPage=3 \ -sOutputFile=fileout.pdf filein.ps Additional Options PDF optimization level selection… Read More »
The Linux command line environment is very powerful and full of very useful command line instructions that are ignored by a lot o people. Following are some of the discovered commands I find very usefull: The “ls like” group: List all the usb devices: [root@localhost ~]# lsusb Bus 004 Device 002: ID 8087:0024 Intel Corp.… Read More »
I am planning to deploy a test openStack infrastructure, “Minimal architecture example with legacy networking (nova-network)”, on the 2 x Hp MicroServer Gen 8 setup from my home data centre. The nova-network architecture needs at least two nodes and on each node a minimal of two network interfaces must be available. The HP MicroServers have… Read More »
When you want to have a secure set-up for your data storage having only two disks available a LVM over a RAID 1 set-up looks like the best solution. When an upgrade is necessary then having two separate RAID 1 based LVMs is no longer so appealing. To keep the same reliability of a disk… Read More »
This should have been one of the first posts of this blog, because deals with the actual setup of the blog. To install a secure Blog is not an easy task. You can take the easy route and host your blog on a blogging site and hope that they will do a good pro bono… Read More »