There are times when even experimented sysadmins do stupid things. One of that moments happened to me when I tried some speed tests on my ssd RAID1. The result was not so satisfactory. Corrupted /boot partition with missing files and orphan inodes. To make things more complicated I have the following constraints that make this… Read More »
Keeping the installation of your own WordPress blog highly secure is very important. In today’s fast pace discovery of security vulnerabilities you must keep an eye on all the new security threats and update as soon as possible the security to try to cover the new threat. An invaluable tool is the security test from… Read More »
As I mentioned in a previous post I started looking into upgrading my Dell XPS 8700 see https://blog.voina.uk/?p=325. One of the possibilities I mentioned there was a memory upgrade from the 16GB of the original configuration to the maximum of 32GB. By doubling the memory size I can run a 4th instance of my Fedora… Read More »
Red Hat Enterprise Linux allows administrators to bind multiple network interfaces together into a single channel using the bonding kernel module and a special network interface called a channel bonding interface. Channel bonding enables two or more network interfaces to act as one, simultaneously increasing the bandwidth and providing redundancy. The behaviour of the bonded… Read More »
My desktop Dell XPS 8700 is a beast even after more than 2 years of the official release. The problem with it is that in a typical big corporate fashion it contains an unbalanced set of hardware: * A very fast processor * 16GB of memory (4x4GB so not so up-gradable to the 32GB maximum)… Read More »
As a big fan of the HP Microserver Gen8 (I own 3 of them in two locations) I compiled my own list of compatible hardware that I am using or used in building the servers.I have to thank the good fan forums that I always consult previous of buying new hardware for my HP Microservers… Read More »
1 General Considerations Our example enterprise applications run on a Linux Cluster with a shared cluster storage resource. Having this HA setup ensures that we have a high rate of service availability on the production site. To ensure that the disruption time in service of our enterprise application is minimal as possible the best solution… Read More »
The following configuration was created to use the iSCSI exported resources from a NetApp storage device as shared disk resources in a Linux cluster environment. The same resources are also replicated to a remote cluster using DRBD disk replication. The production environment contains four exported SAN resources which will be used as shared resources in… Read More »
All started when I wanted to have a true HA configuration for the server nodes. That implies that not only the storage of each server is a RAID10 setup, but also the boot and root resources are in a RAID1 configuration. I started to use an old and known tutorial to convert from standard installation… Read More »
A good way to backup the OS of the servers is to use rear Relax and Recover. Following are the steps to ensure that we have a proper rescue data set for both servers. STEP 1: Install rear from the Fedora repo on both nas1 and nas2 [root@nas1 ~]# dnf install rear [root@nas2 ~]# dnf… Read More »